docker-mailserver.docker-mailserver/docs/content/config/advanced/podman.md

title
Advanced | Podman

Introduction

Podman is a daemonless container engine for developing, managing, and running OCI Containers on your Linux System.

!!! warning "About Support for Podman"

Please note that Podman **is not** officially supported as DMS is built and verified on top of the _Docker Engine_. This content is entirely community supported. If you find errors, please open an issue and provide a PR.

!!! warning "About this Guide"

This guide was tested with Fedora 34 using `systemd` and `firewalld`. Moreover, it requires Podman version >= 3.2. You may be able to substitute `dnf` - Fedora's package manager - with others such as `apt`.

!!! warning "About Security"

Running podman in rootless mode requires additional modifications in order to keep your mailserver secure.
Make sure to read the related documentation.

Installation in Rootful Mode

While using Podman, you can just manage docker-mailserver as what you did with Docker. Your best friend setup.sh includes the minimum code in order to support Podman since it's 100% compatible with the Docker CLI.

The installation is basically the same. Podman v3.2 introduced a RESTful API that is 100% compatible with the Docker API, so you can use Docker Compose with Podman easily. Install Podman and Docker Compose with your package manager first.

sudo dnf install podman docker-compose

Then enable podman.socket using systemctl.

systemctl enable --now podman.socket

This will create a unix socket locate under /run/podman/podman.sock, which is the entrypoint of Podman's API. Now, configure docker-mailserver and start it.

export DOCKER_HOST="unix:///run/podman/podman.sock"
docker compose up -d mailserver
docker compose ps

You should see that docker-mailserver is running now.

Self-start in Rootful Mode

Podman is daemonless, that means if you want docker-mailserver self-start while boot up the system, you have to generate a systemd file with Podman CLI.

podman generate systemd mailserver > /etc/systemd/system/mailserver.service
systemctl daemon-reload
systemctl enable --now mailserver.service

Installation in Rootless Mode

Running rootless containers is one of Podman's major features. But due to some restrictions, deploying docker-mailserver in rootless mode is not as easy compared to rootful mode.

• a rootless container is running in a user namespace so you cannot bind ports lower than 1024
• a rootless container's systemd file can only be placed in folder under ~/.config
• a rootless container can result in an open relay, make sure to read the security section.

Also notice that Podman's rootless mode is not about running as a non-root user inside the container, but about the mapping of (normal, non-root) host users to root inside the container.

!!! warning

In order to make rootless DMS work we must modify some settings in the Linux system, it requires some basic linux server knowledge so don't follow this guide if you not sure what this guide is talking about. Podman rootful mode and Docker are still good and security enough for normal daily usage.

First, enable podman.socket in systemd's userspace with a non-root user.

systemctl enable --now --user podman.socket

The socket file should be located at /var/run/user/$(id -u)/podman/podman.sock. Then, modify compose.yaml to make sure all ports are bindings are on non-privileged ports.

services:
  mailserver:
    ports:
      - "10025:25"   # SMTP  (explicit TLS => STARTTLS)
      - "10143:143"  # IMAP4 (explicit TLS => STARTTLS)
      - "10465:465"  # ESMTP (implicit TLS)
      - "10587:587"  # ESMTP (explicit TLS => STARTTLS)
      - "10993:993"  # IMAP4 (implicit TLS)

Then, setup your mailserver.env file follow the documentation and use Docker Compose to start the container.

export DOCKER_HOST="unix:///var/run/user/$(id -u)/podman/podman.sock"
docker compose up -d mailserver
docker compose ps

Rootless Quadlet

!!! warning "podman generate systemd is deprecated"

The [`podman generate systemd`][podman-docs::cli::generate-systemd] command has been deprecated [since Podman v4.7][gh::podman::release-4.7] (Sep 2023) in favor of Quadlets (_available [since Podman v4.4][gh::podman::release-4.4]_).

!!! info "What is a Quadlet?"

A [Quadlet][podman::quadlet::introduction] file uses the [systemd config format][systemd-docs::config-syntax] which is similar to the INI format.

[Quadlets define your podman configuration][podman-docs::quadlet::example-configs] (_pods, volumes, networks, images, etc_) which are [adapted into the equivalent systemd service config files][podman::quadlet::generated-output-example] at [boot or when reloading the systemd daemon][podman-docs::config::quadlet-generation] (`systemctl daemon-reload` / `systemctl --user daemon-reload`).

!!! tip "Rootless compatibility"

Quadlets can [support rootless with a few differences][podman::rootless-differences]:

- `Network=pasta` configures [`pasta`][network-driver::pasta] as a rootless compatible network driver (_a popular alternative to `slirp4netns`. `pasta` is the default for rootless since Podman v5_).
- `Restart=always` will auto-start your Quadlet at login. Rootless support requires to enable [lingering][systemd-docs::loginctl::linger] for your user:

    ```bash
    loginctl enable-linger user
    ```
- [Config locations between rootful vs rootless][podman-docs::quadlet::config-search-path].

Example Quadlet file

???+ example

1. Create your DMS Quadlet at `~/.config/containers/systemd/dms.container` with the example content shown below.
    - Adjust settings like `HostName` as needed. You may prefer a different convention for your `Volume` host paths.
    - Some syntax like systemd specifiers and Podman's `UIDMap` value are explained in detail after this example.
2. Run [`systemctl --user daemon-reload`][systemd-docs::systemctl::daemon-reload], which will trigger the Quadlet service generator. This command is required whenever you adjust config in `dms.container`.
3. You should now be able to start the service with `systemctl --user start dms`.

[Unit]
Description="Docker Mail Server"
Documentation=https://docker-mailserver.github.io/docker-mailserver/latest

[Service]
Restart=always
# Optional - This will run before the container starts:
# - It ensures all the DMS volumes have the host directories created for you.
# - For `mkdir` command to leverage the shell brace expansion syntax, you need to run it via bash.
ExecStartPre=/usr/bin/bash -c 'mkdir -p %h/volumes/%N/{mail-data,mail-state,mail-logs,config}'

# This section enables the service at generation, avoids requiring `systemctl --user enable dms`:
# - `multi-user.target` => root
# - `default.target` => rootless
[Install]
WantedBy=default.target

[Container]
ContainerName=%N
HostName=mail.example.com
Image=docker.io/mailserver/docker-mailserver:latest

PublishPort=25:25
PublishPort=143:143
PublishPort=587:587
PublishPort=993:993

# The container UID for root will be mapped to the host UID running this Quadlet service.
# All other UIDs in the container are mapped via the sub-id range for that user from host configs `/etc/subuid` + `/etc/subgid`.
UIDMap=+0:@%U

# Volumes (Base location example: `%h/volumes/%N` => `~/volumes/dms`)
# NOTE: If your host has SELinux enabled, avoid permission errors by appending the mount option `:Z`.
Volume=%h/volumes/%N/mail-data:/var/mail
Volume=%h/volumes/%N/mail-state:/var/mail-state
Volume=%h/volumes/%N/mail-logs:/var/log/mail
Volume=%h/volumes/%N/config:/tmp/docker-mailserver
# Optional - Additional mounts:
# NOTE: For SELinux, when using the `z` or `Z` mount options:
#   Take caution if choosing a host location not belonging to your user. Consider using `SecurityLabelDisable=true` instead.
#   https://docs.podman.io/en/latest/markdown/podman-run.1.html#volume-v-source-volume-host-dir-container-dir-options
Volume=%h/volumes/certbot/certs:/etc/letsencrypt:ro

# Podman can create a timer (defaults to daily at midnight) to check the `registry` or `local` storage for detecting if the
# image tag points to a new digest, if so it updates the image and restarts the service (similar to `containrrr/watchtower`):
# https://docs.podman.io/en/latest/markdown/podman-auto-update.1.html
AutoUpdate=registry

# Podman Quadlet has a better alternative instead of a volume directly bind mounting `/etc/localtime` to match the host TZ:
# https://docs.podman.io/en/latest/markdown/podman-run.1.html#tz-timezone
# NOTE: Should the host modify the system TZ, neither approach will sync the change to the `/etc/localtime` inside the running container.
Timezone=local

Environment=SSL_TYPE=letsencrypt
# NOTE: You may need to adjust the default `NETWORK_INTERFACE`:
# https://docker-mailserver.github.io/docker-mailserver/latest/config/environment/#network_interface
#Environment=NETWORK_INTERFACE=enp1s0
#Environment=NETWORK_INTERFACE=tap0

??? info "Systemd specifiers"

Systemd has a [variety of specifiers][systemd-docs::config-specifiers] (_prefixed with `%`_) that help manage configs.

Here are the ones used in the Quadlet config example:

- **`%h`:** Location of the users home directory. Use this instead of `~` (_which would only work in a shell, not this config_).
- **`%N`:** Represents the unit service name, which is taken from the filename excluding the extension (_thus `dms.container` => `dms`_).
- **`%U`:** The UID of the user running this service. The next section details the relevance with `UIDMap`.

---

If you prefer the conventional XDG locations, you may prefer `%D` + `%E` + `%S` as part of your `Volume` host paths.

Stopping the service with systemd will result in the container being removed. Restarting will use the existing container, which is however not recommended. You do not need to enable services with Quadlet.

Start container:

systemctl --user start dockermailserver

Stop container:

systemctl --user stop dockermailserver

Using root with machinectl (used for some Ansible versions):

machinectl -q shell yourrootlessuser@ /bin/systemctl --user start dockermailserver

Mapping ownership between container and host users

Podman supports a few different approaches for this functionality. For rootless Quadlets you will likely want to use UIDMap (GIDMap will use this same mapping by default).

• UIDMap + GIDMap works by mapping user and group IDs from a container, to IDs associated for a user on the host configured in /etc/subuid + /etc/subgid (this isn't necessary for rootful Podman).
• Each mapping must be unique, thus only a single container UID can map to your rootless UID on the host. Every other container UID mapped must be within the configured range from /etc/subuid.
• Rootless containers have one additional level of mapping involved. This is an offset from their /etc/subuid entry starting from 0, but can be inferred when the intended UID on the host is prefixed with @

??? tip "Why should I prefer UIDMap=+0:@%U? How does the @ syntax work?"

The most common case is to map the containers root user (UID `0`) to your host user ID.

For a rootless user with the UID `1000` on the host, any of the following `UIDMap` values are equivalent:

- **`UIDMap=+0:0`:** The 1st `0` is the container root ID and the 2nd `0` refers to host mapping ID. For rootless the mapping ID is an indirect offset to their user entry in `/etc/subuid` where `0` maps to their host user ID, while `1` or higher maps to the users subuid range.
- **`UIDMap=+0:@1000`:** A rootless Quadlet can also use `@` as a prefix which Podman will then instead lookup as the host ID in `/etc/subuid` to get the offset value. If the host user ID was `1000`, then `@1000` would resolve that to `0`.
- **`UIDMap=+0:@%U`:** Instead of providing the explicit rootless UID, a better approach is to leverage `%U` (_a [systemd specifier][systemd-docs::config-specifiers]_) which will resolve to the UID of your rootless user that starts the Quadlet service.

??? tip "What is the + syntax used with UIDMap?"

Prefixing the container ID with `+` is a a podman feature similar to `@`, which ensures `/etc/subuid` is mapped fully.

For example `UIDMap=+5000:@%U` is the short-hand equivalent to:

```ini
UIDMap=5000:0:1
UIDMap=0:1:5000
UIDMap=5001:5001:60536
```

The third value is the amount of IDs to map from the `container:host` pair as an offset/range. It defaults to `1`.

In addition to our explicit `5000:0` mapping, the `+` ensures:

- That we have a mapping of all container ID prior to `5000` to IDs from our rootless user entry in `/etc/subuid` on the host.
- It also adds a mapping after this value for the remainder of the range configured in `/etc/subuid` which covers the `nobody` user in the container.

Within the container you can view these mappings via `cat /proc/self/uid_map`.

??? warning "Impact on disk usage of images with Rootless"

**NOTE:** This should not usually be a concern, but has been documented here to explain the impact of creating new user namespaces (_such as by running a container with settings like `UIDMap` that differ between runs_).

---

Rootless containers [perform a copy of the image with `chown`][caveat::podman::rootless::image-chown] during the first pull/run of the image.

- The larger the image to copy, the longer the initial delay on first use.
- This process will be repeated if the `UIDMap` / `GIDMap` settings are changed to a value that has not been used previously (_accumulating more disk usage with additional image layer copies_).
- Only when the original image is removed will any of these associated `chown` image copies be purged from storage.

When you specify a `UIDMap` like demonstrated in the earlier tip for the `+` syntax with `UIDMap=+0:5000`, if the `/proc/self/uid_map` shows a row with the first two columns as equivalent then no excess `chown` should be applied.

- `UIDMap=+0:@%U` is equivalent from ID 2 onwards.
- `UIDMap=+5000:@%U` is equivalent from ID 5001 onwards. This is relevant with DMS as the container UID 200 is assigned to ClamAV, the offset introduced will now incur a `chown` copy of 230MB.

Security in Rootless Mode

In rootless mode, podman resolves all incoming IPs as localhost, which results in an open gateway in the default configuration. There are two workarounds to fix this problem, both of which have their own drawbacks.

Enforce authentication from localhost

The PERMIT_DOCKER variable in the mailserver.env file allows to specify trusted networks that do not need to authenticate. If the variable is left empty, only requests from localhost and the container IP are allowed, but in the case of rootless podman any IP will be resolved as localhost. Setting PERMIT_DOCKER=none enforces authentication also from localhost, which prevents sending unauthenticated emails.

Use the pasta network driver

Since Podman 5.0 the default rootless network driver is now pasta instead of slirp4netns. These two drivers have some differences:

Notable differences of pasta network mode compared to slirp4netns include:

• pasta supports IPv6 port forwarding.
• pasta is more efficient than slirp4netns.
• pasta copies IP addresses from the host, while slirp4netns uses a predefined IPv4 address.
• pasta uses an interface name from the host, while slirp4netns uses tap0 as an interface name.
• pasta uses the gateway address from the host, while slirp4netns defines its own gateway address and uses NAT.

Use the slip4netns network driver

The second workaround is slightly more complicated because the compose.yaml has to be modified. As shown in the fail2ban section the slirp4netns network driver has to be enabled. This network driver enables podman to correctly resolve IP addresses but it is not compatible with user defined networks which might be a problem depending on your setup.

Rootless Podman requires adding the value slirp4netns:port_handler=slirp4netns to the --network CLI option, or network_mode setting in your compose.yaml.

You must also add the ENV NETWORK_INTERFACE=tap0, because Podman uses a hard-coded interface name for slirp4netns.

!!! example

```yaml
services:
  mailserver:
    network_mode: "slirp4netns:port_handler=slirp4netns"
    environment:
      - NETWORK_INTERFACE=tap0
      ...
```

!!! note

`podman-compose` is not compatible with this configuration.

Self-start in Rootless Mode

Generate a systemd file with the Podman CLI.

podman generate systemd mailserver > ~/.config/systemd/user/mailserver.service
systemctl --user daemon-reload
systemctl enable --user --now mailserver.service

Systemd's user space service is only started when a specific user logs in and stops when you log out. In order to make it to start with the system, we need to enable linger with loginctl

loginctl enable-linger <username>

Remember to run this command as root user.

Port Forwarding

When it comes to forwarding ports using firewalld, see these port forwarding docs for more information.

firewall-cmd --permanent --add-forward-port=port=<25|143|465|587|993>:proto=<tcp>:toport=<10025|10143|10465|10587|10993>
...

# After you set all ports up.
firewall-cmd --reload

Notice that this will only open the access to the external client. If you want to access privileges port in your server, do this:

firewall-cmd --permanent --direct --add-rule <ipv4|ipv6> nat OUTPUT 0 -p <tcp|udp> -o lo --dport <25|143|465|587|993> -j REDIRECT --to-ports <10025|10143|10465|10587|10993>
...
# After you set all ports up.
firewall-cmd --reload

Just map all the privilege port with non-privilege port you set in compose.yaml before as root user.