Merge branch 'nvim-lua:master' into setup

init.lua

@@ -94,68 +94,77 @@ vim.g.maplocalleader = '-'
 vim.g.have_nerd_font = false
 
 -- [[ Setting options ]]
--- See `:help vim.opt`
+-- See `:help vim.o`
 -- NOTE: You can change these options as you wish!
 --  For more options, you can see `:help option-list`
 
 -- Make line numbers default
-vim.opt.number = true
+vim.o.number = true
 -- You can also add relative line numbers, to help with jumping.
 --  Experiment for yourself to see if you like it!
--- vim.opt.relativenumber = true
+-- vim.o.relativenumber = true
 
 -- Enable mouse mode, can be useful for resizing splits for example!
-vim.opt.mouse = 'a'
+vim.o.mouse = 'a'
 
 -- Don't show the mode, since it's already in the status line
-vim.opt.showmode = false
+vim.o.showmode = false
 
 -- Sync clipboard between OS and Neovim.
 --  Schedule the setting after `UiEnter` because it can increase startup-time.
 --  Remove this option if you want your OS clipboard to remain independent.
 --  See `:help 'clipboard'`
 vim.schedule(function()
-  vim.opt.clipboard = 'unnamedplus'
+  vim.o.clipboard = 'unnamedplus'
 end)
 
 -- Enable break indent
-vim.opt.breakindent = true
+vim.o.breakindent = true
 
 -- Save undo history
-vim.opt.undofile = true
+vim.o.undofile = true
 
 -- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
-vim.opt.ignorecase = true
-vim.opt.smartcase = true
+vim.o.ignorecase = true
+vim.o.smartcase = true
 
 -- Keep signcolumn on by default
-vim.opt.signcolumn = 'yes'
+vim.o.signcolumn = 'yes'
 
 -- Decrease update time
-vim.opt.updatetime = 250
+vim.o.updatetime = 250
 
 -- Decrease mapped sequence wait time
--- Displays which-key popup sooner
-vim.opt.timeoutlen = 300
+vim.o.timeoutlen = 300
 
 -- Configure how new splits should be opened
-vim.opt.splitright = true
-vim.opt.splitbelow = true
+vim.o.splitright = true
+vim.o.splitbelow = true
 
 -- Sets how neovim will display certain whitespace characters in the editor.
 --  See `:help 'list'`
 --  and `:help 'listchars'`
-vim.opt.list = true
+--
+--  Notice listchars is set using `vim.opt` instead of `vim.o`.
+--  It is very similar to `vim.o` but offers an interface for conveniently interacting with tables.
+--   See `:help lua-options`
+--   and `:help lua-options-guide`
+vim.o.list = true
 vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
 
 -- Preview substitutions live, as you type!
-vim.opt.inccommand = 'split'
+vim.o.inccommand = 'split'
 
 -- Show which line your cursor is on
-vim.opt.cursorline = true
+vim.o.cursorline = true
 
 -- Minimal number of screen lines to keep above and below the cursor.
-vim.opt.scrolloff = 10
+vim.o.scrolloff = 10
+
+-- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
+-- instead raise a dialog asking if you wish to save the current file(s)
+-- See `:help 'confirm'`
+vim.o.confirm = true
 
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()
@@ -193,17 +202,23 @@ vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right win
 vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
 vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
 
+-- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes
+-- vim.keymap.set("n", "<C-S-h>", "<C-w>H", { desc = "Move window to the left" })
+-- vim.keymap.set("n", "<C-S-l>", "<C-w>L", { desc = "Move window to the right" })
+-- vim.keymap.set("n", "<C-S-j>", "<C-w>J", { desc = "Move window to the lower" })
+-- vim.keymap.set("n", "<C-S-k>", "<C-w>K", { desc = "Move window to the upper" })
+
 -- [[ Basic Autocommands ]]
 --  See `:help lua-guide-autocommands`
 
 -- Highlight when yanking (copying) text
 --  Try it with `yap` in normal mode
---  See `:help vim.highlight.on_yank()`
+--  See `:help vim.hl.on_yank()`
 vim.api.nvim_create_autocmd('TextYankPost', {
   desc = 'Highlight when yanking (copying) text',
   group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
   callback = function()
-    vim.highlight.on_yank()
+    vim.hl.on_yank()
   end,
 })
 
@@ -216,8 +231,11 @@ if not (vim.uv or vim.loop).fs_stat(lazypath) then
   if vim.v.shell_error ~= 0 then
     error('Error cloning lazy.nvim:\n' .. out)
   end
-end ---@diagnostic disable-next-line: undefined-field
-vim.opt.rtp:prepend(lazypath)
+end
+
+---@type vim.Option
+local rtp = vim.opt.rtp
+rtp:prepend(lazypath)
 
 -- [[ Configure and install plugins ]]
 --
@@ -232,18 +250,28 @@ vim.opt.rtp:prepend(lazypath)
 -- NOTE: Here is where you install your plugins.
 require('lazy').setup({
   -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
-  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
+  'NMAC427/guess-indent.nvim', -- Detect tabstop and shiftwidth automatically
 
   -- NOTE: Plugins can also be added by using a table,
   -- with the first argument being the link and the following
   -- keys can be used to configure plugin behavior/loading/etc.
   --
-  -- Use `opts = {}` to force a plugin to be loaded.
+  -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded.
   --
 
+  -- Alternatively, use `config = function() ... end` for full control over the configuration.
+  -- If you prefer to call `setup` explicitly, use:
+  --    {
+  --        'lewis6991/gitsigns.nvim',
+  --        config = function()
+  --            require('gitsigns').setup({
+  --                -- Your gitsigns configuration here
+  --            })
+  --        end,
+  --    }
+  --
   -- Here is a more advanced example where we pass configuration
-  -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
-  --    require('gitsigns').setup({ ... })
+  -- options to `gitsigns.nvim`.
   --
   -- See `:help gitsigns` to understand what the configuration keys do
   { -- Adds git related signs to the gutter, as well as utilities for managing changes
@@ -270,64 +298,60 @@ require('lazy').setup({
   -- which loads which-key before all the UI elements are loaded. Events can be
   -- normal autocommands events (`:help autocmd-events`).
   --
-  -- Then, because we use the `config` key, the configuration only runs
-  -- after the plugin has been loaded:
-  --  config = function() ... end
+  -- Then, because we use the `opts` key (recommended), the configuration runs
+  -- after the plugin has been loaded as `require(MODULE).setup(opts)`.
 
   { -- Useful plugin to show you pending keybinds.
     'folke/which-key.nvim',
     event = 'VimEnter', -- Sets the loading event to 'VimEnter'
-    config = function() -- This is the function that runs, AFTER loading
-      require('which-key').setup {
-        icons = {
-          -- set icon mappings to true if you have a Nerd Font
-          mappings = vim.g.have_nerd_font,
-          -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
-          -- default whick-key.nvim defined Nerd Font icons, otherwise define a string table
-          keys = vim.g.have_nerd_font and {} or {
-            Up = '<Up> ',
-            Down = '<Down> ',
-            Left = '<Left> ',
-            Right = '<Right> ',
-            C = '<C-…> ',
-            M = '<M-…> ',
-            D = '<D-…> ',
-            S = '<S-…> ',
-            CR = '<CR> ',
-            Esc = '<Esc> ',
-            ScrollWheelDown = '<ScrollWheelDown> ',
-            ScrollWheelUp = '<ScrollWheelUp> ',
-            NL = '<NL> ',
-            BS = '<BS> ',
-            Space = '<Space> ',
-            Tab = '<Tab> ',
-            F1 = '<F1>',
-            F2 = '<F2>',
-            F3 = '<F3>',
-            F4 = '<F4>',
-            F5 = '<F5>',
-            F6 = '<F6>',
-            F7 = '<F7>',
-            F8 = '<F8>',
-            F9 = '<F9>',
-            F10 = '<F10>',
-            F11 = '<F11>',
-            F12 = '<F12>',
-          },
+    opts = {
+      -- delay between pressing a key and opening which-key (milliseconds)
+      -- this setting is independent of vim.o.timeoutlen
+      delay = 0,
+      icons = {
+        -- set icon mappings to true if you have a Nerd Font
+        mappings = vim.g.have_nerd_font,
+        -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
+        -- default which-key.nvim defined Nerd Font icons, otherwise define a string table
+        keys = vim.g.have_nerd_font and {} or {
+          Up = '<Up> ',
+          Down = '<Down> ',
+          Left = '<Left> ',
+          Right = '<Right> ',
+          C = '<C-…> ',
+          M = '<M-…> ',
+          D = '<D-…> ',
+          S = '<S-…> ',
+          CR = '<CR> ',
+          Esc = '<Esc> ',
+          ScrollWheelDown = '<ScrollWheelDown> ',
+          ScrollWheelUp = '<ScrollWheelUp> ',
+          NL = '<NL> ',
+          BS = '<BS> ',
+          Space = '<Space> ',
+          Tab = '<Tab> ',
+          F1 = '<F1>',
+          F2 = '<F2>',
+          F3 = '<F3>',
+          F4 = '<F4>',
+          F5 = '<F5>',
+          F6 = '<F6>',
+          F7 = '<F7>',
+          F8 = '<F8>',
+          F9 = '<F9>',
+          F10 = '<F10>',
+          F11 = '<F11>',
+          F12 = '<F12>',
         },
-      }
+      },
 
       -- Document existing key chains
-      require('which-key').add {
-        { '<leader>c', group = '[C]ode' },
-        { '<leader>d', group = '[D]ocument' },
-        { '<leader>r', group = '[R]ename' },
+      spec = {
         { '<leader>s', group = '[S]earch' },
-        { '<leader>w', group = '[W]orkspace' },
         { '<leader>t', group = '[T]oggle' },
         { '<leader>h', group = 'Git [H]unk', mode = { 'n', 'v' } },
-      }
-    end,
+      },
+    },
   },
 
   -- NOTE: Plugins can specify dependencies.
@@ -340,7 +364,6 @@ require('lazy').setup({
   { -- Fuzzy Finder (files, lsp, etc)
     'nvim-telescope/telescope.nvim',
     event = 'VimEnter',
-    branch = '0.1.x',
     dependencies = {
       'nvim-lua/plenary.nvim',
       { -- If encountering errors, see telescope-fzf-native README for installation instructions
@@ -451,26 +474,26 @@ require('lazy').setup({
     opts = {
       library = {
         -- Load luvit types when the `vim.uv` word is found
-        { path = 'luvit-meta/library', words = { 'vim%.uv' } },
+        { path = '${3rd}/luv/library', words = { 'vim%.uv' } },
       },
     },
   },
-  { 'Bilal2453/luvit-meta', lazy = true },
   {
     -- Main LSP Configuration
     'neovim/nvim-lspconfig',
     dependencies = {
       -- Automatically install LSPs and related tools to stdpath for Neovim
-      { 'williamboman/mason.nvim', config = true }, -- NOTE: Must be loaded before dependants
-      'williamboman/mason-lspconfig.nvim',
+      -- Mason must be loaded before its dependents so we need to set it up here.
+      -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})`
+      { 'mason-org/mason.nvim', opts = {} },
+      'mason-org/mason-lspconfig.nvim',
       'WhoIsSethDaniel/mason-tool-installer.nvim',
 
       -- Useful status updates for LSP.
-      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
       { 'j-hui/fidget.nvim', opts = {} },
 
-      -- Allows extra capabilities provided by nvim-cmp
-      'hrsh7th/cmp-nvim-lsp',
+      -- Allows extra capabilities provided by blink.cmp
+      'saghen/blink.cmp',
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -510,46 +533,60 @@ require('lazy').setup({
           --
           -- In this case, we create a function that lets us more easily define mappings specific
           -- for LSP related items. It sets the mode, buffer and description for us each time.
-          local map = function(keys, func, desc)
-            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
+          local map = function(keys, func, desc, mode)
+            mode = mode or 'n'
+            vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
           end
 
+          -- Rename the variable under your cursor.
+          --  Most Language Servers support renaming across files, etc.
+          map('grn', vim.lsp.buf.rename, '[R]e[n]ame')
+
+          -- Execute a code action, usually your cursor needs to be on top of an error
+          -- or a suggestion from your LSP for this to activate.
+          map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' })
+
+          -- Find references for the word under your cursor.
+          map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+
+          -- Jump to the implementation of the word under your cursor.
+          --  Useful when your language has ways of declaring types without an actual implementation.
+          map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+
           -- Jump to the definition of the word under your cursor.
           --  This is where a variable was first declared, or where a function is defined, etc.
           --  To jump back, press <C-t>.
-          map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+          map('grd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
 
-          -- Find references for the word under your cursor.
-          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+          -- WARN: This is not Goto Definition, this is Goto Declaration.
+          --  For example, in C this would take you to the header.
+          map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
 
-          -- Jump to the implementation of the word under your cursor.
-          --  Useful when your language has ways of declaring types without an actual implementation.
-          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+          -- Fuzzy find all the symbols in your current document.
+          --  Symbols are things like variables, functions, types, etc.
+          map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols')
+
+          -- Fuzzy find all the symbols in your current workspace.
+          --  Similar to document symbols, except searches over your entire project.
+          map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols')
 
           -- Jump to the type of the word under your cursor.
           --  Useful when you're not sure what type a variable is and you want to see
           --  the definition of its *type*, not where it was *defined*.
-          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+          map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition')
 
-          -- Fuzzy find all the symbols in your current document.
-          --  Symbols are things like variables, functions, types, etc.
-          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
-
-          -- Fuzzy find all the symbols in your current workspace.
-          --  Similar to document symbols, except searches over your entire project.
-          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
-
-          -- Rename the variable under your cursor.
-          --  Most Language Servers support renaming across files, etc.
-          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
-
-          -- Execute a code action, usually your cursor needs to be on top of an error
-          -- or a suggestion from your LSP for this to activate.
-          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
-
-          -- WARN: This is not Goto Definition, this is Goto Declaration.
-          --  For example, in C this would take you to the header.
-          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+          -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10)
+          ---@param client vim.lsp.Client
+          ---@param method vim.lsp.protocol.Method
+          ---@param bufnr? integer some lsp support methods only in specific files
+          ---@return boolean
+          local function client_supports_method(client, method, bufnr)
+            if vim.fn.has 'nvim-0.11' == 1 then
+              return client:supports_method(method, bufnr)
+            else
+              return client.supports_method(method, { bufnr = bufnr })
+            end
+          end
 
           -- The following two autocommands are used to highlight references of the
           -- word under your cursor when your cursor rests there for a little while.
@@ -557,7 +594,7 @@ require('lazy').setup({
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
+          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then
             local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
@@ -584,7 +621,7 @@ require('lazy').setup({
           -- code, if the language server you are using supports them
           --
           -- This may be unwanted, since they displace some of your code
-          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
+          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then
             map('<leader>th', function()
               vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
             end, '[T]oggle Inlay [H]ints')
@@ -592,12 +629,40 @@ require('lazy').setup({
         end,
       })
 
+      -- Diagnostic Config
+      -- See :help vim.diagnostic.Opts
+      vim.diagnostic.config {
+        severity_sort = true,
+        float = { border = 'rounded', source = 'if_many' },
+        underline = { severity = vim.diagnostic.severity.ERROR },
+        signs = vim.g.have_nerd_font and {
+          text = {
+            [vim.diagnostic.severity.ERROR] = '󰅚 ',
+            [vim.diagnostic.severity.WARN] = '󰀪 ',
+            [vim.diagnostic.severity.INFO] = '󰋽 ',
+            [vim.diagnostic.severity.HINT] = '󰌶 ',
+          },
+        } or {},
+        virtual_text = {
+          source = 'if_many',
+          spacing = 2,
+          format = function(diagnostic)
+            local diagnostic_message = {
+              [vim.diagnostic.severity.ERROR] = diagnostic.message,
+              [vim.diagnostic.severity.WARN] = diagnostic.message,
+              [vim.diagnostic.severity.INFO] = diagnostic.message,
+              [vim.diagnostic.severity.HINT] = diagnostic.message,
+            }
+            return diagnostic_message[diagnostic.severity]
+          end,
+        },
+      }
+
       -- LSP servers and clients are able to communicate to each other what features they support.
       --  By default, Neovim doesn't support everything that is in the LSP specification.
-      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
-      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
-      local capabilities = vim.lsp.protocol.make_client_capabilities()
-      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
+      --  When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities.
+      --  So, we create new capabilities with blink.cmp, and then broadcast that to the servers.
+      local capabilities = require('blink.cmp').get_lsp_capabilities()
 
       -- Enable the following language servers
       --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
@@ -667,14 +732,14 @@ require('lazy').setup({
         -- Some languages (like typescript) have entire language plugins that can be useful:
         --    https://github.com/pmizio/typescript-tools.nvim
         --
-        -- But for many setups, the LSP (`tsserver`) will work just fine
-        -- tsserver = {},
+        -- But for many setups, the LSP (`ts_ls`) will work just fine
+        -- ts_ls = {},
         --
         --
 
         lua_ls = {
-          -- cmd = {...},
-          -- filetypes = { ...},
+          -- cmd = { ... },
+          -- filetypes = { ... },
           -- capabilities = {},
           settings = {
             Lua = {
@@ -689,13 +754,16 @@ require('lazy').setup({
       }
 
       -- Ensure the servers and tools above are installed
-      --  To check the current status of installed tools and/or manually install
-      --  other tools, you can run
+      --
+      -- To check the current status of installed tools and/or manually install
+      -- other tools, you can run
       --    :Mason
       --
-      --  You can press `g?` for help in this menu.
-      require('mason').setup()
-
+      -- You can press `g?` for help in this menu.
+      --
+      -- `mason` had to be setup earlier: to configure its options see the
+      -- `dependencies` table for `nvim-lspconfig` above.
+      --
       -- You can add other tools here that you want Mason to install
       -- for you, so that they are available from within Neovim.
       local ensure_installed = vim.tbl_keys(servers or {})
@@ -705,12 +773,14 @@ require('lazy').setup({
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
       require('mason-lspconfig').setup {
+        ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer)
+        automatic_installation = false,
         handlers = {
           function(server_name)
             local server = servers[server_name] or {}
             -- This handles overriding only values explicitly passed
             -- by the server configuration above. Useful when disabling
-            -- certain features of an LSP (for example, turning off formatting for tsserver)
+            -- certain features of an LSP (for example, turning off formatting for ts_ls)
             server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
             require('lspconfig')[server_name].setup(server)
           end,
@@ -727,7 +797,7 @@ require('lazy').setup({
       {
         '<leader>f',
         function()
-          require('conform').format { async = true, lsp_fallback = true }
+          require('conform').format { async = true, lsp_format = 'fallback' }
         end,
         mode = '',
         desc = '[F]ormat buffer',
@@ -740,10 +810,14 @@ require('lazy').setup({
         -- have a well standardized coding style. You can add additional
         -- languages here or re-enable it for the disabled ones.
         local disable_filetypes = { c = true, cpp = true }
-        return {
-          timeout_ms = 500,
-          lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype],
-        }
+        if disable_filetypes[vim.bo[bufnr].filetype] then
+          return nil
+        else
+          return {
+            timeout_ms = 500,
+            lsp_format = 'fallback',
+          }
+        end
       end,
       formatters_by_ft = {
         lua = { 'stylua' },
@@ -757,12 +831,14 @@ require('lazy').setup({
   },
 
   { -- Autocompletion
-    'hrsh7th/nvim-cmp',
-    event = 'InsertEnter',
+    'saghen/blink.cmp',
+    event = 'VimEnter',
+    version = '1.*',
     dependencies = {
-      -- Snippet Engine & its associated nvim-cmp source
+      -- Snippet Engine
       {
         'L3MON4D3/LuaSnip',
+        version = '2.*',
         build = (function()
           -- Build Step is needed for regex support in snippets.
           -- This step is not supported in many windows environments.
@@ -783,93 +859,74 @@ require('lazy').setup({
           --   end,
           -- },
         },
+        opts = {},
       },
-      'saadparwaiz1/cmp_luasnip',
-
-      -- Adds other completion capabilities.
-      --  nvim-cmp does not ship with all sources by default. They are split
-      --  into multiple repos for maintenance purposes.
-      'hrsh7th/cmp-nvim-lsp',
-      'hrsh7th/cmp-path',
+      'folke/lazydev.nvim',
     },
-    config = function()
-      -- See `:help cmp`
-      local cmp = require 'cmp'
-      local luasnip = require 'luasnip'
-      luasnip.config.setup {}
-
-      cmp.setup {
-        snippet = {
-          expand = function(args)
-            luasnip.lsp_expand(args.body)
-          end,
-        },
-        completion = { completeopt = 'menu,menuone,noinsert' },
-
-        -- For an understanding of why these mappings were
-        -- chosen, you will need to read `:help ins-completion`
+    --- @module 'blink.cmp'
+    --- @type blink.cmp.Config
+    opts = {
+      keymap = {
+        -- 'default' (recommended) for mappings similar to built-in completions
+        --   <c-y> to accept ([y]es) the completion.
+        --    This will auto-import if your LSP supports it.
+        --    This will expand snippets if the LSP sent a snippet.
+        -- 'super-tab' for tab to accept
+        -- 'enter' for enter to accept
+        -- 'none' for no mappings
+        --
+        -- For an understanding of why the 'default' preset is recommended,
+        -- you will need to read `:help ins-completion`
         --
         -- No, but seriously. Please read `:help ins-completion`, it is really good!
-        mapping = cmp.mapping.preset.insert {
-          -- Select the [n]ext item
-          ['<C-n>'] = cmp.mapping.select_next_item(),
-          -- Select the [p]revious item
-          ['<C-p>'] = cmp.mapping.select_prev_item(),
+        --
+        -- All presets have the following mappings:
+        -- <tab>/<s-tab>: move to right/left of your snippet expansion
+        -- <c-space>: Open menu or open docs if already open
+        -- <c-n>/<c-p> or <up>/<down>: Select next/previous item
+        -- <c-e>: Hide menu
+        -- <c-k>: Toggle signature help
+        --
+        -- See :h blink-cmp-config-keymap for defining your own keymap
+        preset = 'default',
 
-          -- Scroll the documentation window [b]ack / [f]orward
-          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
-          ['<C-f>'] = cmp.mapping.scroll_docs(4),
+        -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
+        --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
+      },
 
-          -- Accept ([y]es) the completion.
-          --  This will auto-import if your LSP supports it.
-          --  This will expand snippets if the LSP sent a snippet.
-          ['<C-y>'] = cmp.mapping.confirm { select = true },
+      appearance = {
+        -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font'
+        -- Adjusts spacing to ensure icons are aligned
+        nerd_font_variant = 'mono',
+      },
 
-          -- If you prefer more traditional completion keymaps,
-          -- you can uncomment the following lines
-          --['<CR>'] = cmp.mapping.confirm { select = true },
-          --['<Tab>'] = cmp.mapping.select_next_item(),
-          --['<S-Tab>'] = cmp.mapping.select_prev_item(),
+      completion = {
+        -- By default, you may press `<c-space>` to show the documentation.
+        -- Optionally, set `auto_show = true` to show the documentation after a delay.
+        documentation = { auto_show = false, auto_show_delay_ms = 500 },
+      },
 
-          -- Manually trigger a completion from nvim-cmp.
-          --  Generally you don't need this, because nvim-cmp will display
-          --  completions whenever it has completion options available.
-          ['<C-Space>'] = cmp.mapping.complete {},
-
-          -- Think of <c-l> as moving to the right of your snippet expansion.
-          --  So if you have a snippet that's like:
-          --  function $name($args)
-          --    $body
-          --  end
-          --
-          -- <c-l> will move you to the right of each of the expansion locations.
-          -- <c-h> is similar, except moving you backwards.
-          ['<C-l>'] = cmp.mapping(function()
-            if luasnip.expand_or_locally_jumpable() then
-              luasnip.expand_or_jump()
-            end
-          end, { 'i', 's' }),
-          ['<C-h>'] = cmp.mapping(function()
-            if luasnip.locally_jumpable(-1) then
-              luasnip.jump(-1)
-            end
-          end, { 'i', 's' }),
-
-          -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
-          --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
+      sources = {
+        default = { 'lsp', 'path', 'snippets', 'lazydev' },
+        providers = {
+          lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 },
         },
-        sources = {
-          {
-            name = 'lazydev',
-            -- set group index to 0 to skip loading LuaLS completions as lazydev recommends it
-            group_index = 0,
-          },
-          { name = 'nvim_lsp' },
-          { name = 'luasnip' },
-          { name = 'path' },
-        },
-      }
-    end,
+      },
+
+      snippets = { preset = 'luasnip' },
+
+      -- Blink.cmp includes an optional, recommended rust fuzzy matcher,
+      -- which automatically downloads a prebuilt binary when enabled.
+      --
+      -- By default, we use the Lua implementation instead, but you may enable
+      -- the rust implementation via `'prefer_rust_with_warning'`
+      --
+      -- See :h blink-cmp-config-fuzzy for more information
+      fuzzy = { implementation = 'lua' },
+
+      -- Shows a signature help window while you type arguments for a function
+      signature = { enabled = true },
+    },
   },
 
   { -- You can easily change to a different colorscheme.
@@ -879,14 +936,18 @@ require('lazy').setup({
     -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
     'folke/tokyonight.nvim',
     priority = 1000, -- Make sure to load this before all the other start plugins.
-    init = function()
+    config = function()
+      ---@diagnostic disable-next-line: missing-fields
+      require('tokyonight').setup {
+        styles = {
+          comments = { italic = false }, -- Disable italics in comments
+        },
+      }
+
       -- Load the colorscheme here.
       -- Like many other themes, this one has different styles, and you could load
       -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
       vim.cmd.colorscheme 'tokyonight-night'
-
-      -- You can configure highlights by doing something like:
-      vim.cmd.hi 'Comment gui=none'
     end,
   },
 
@@ -956,7 +1017,7 @@ require('lazy').setup({
     --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
   },
 
-  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
+  -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the
   -- init.lua. If you want these files, they are in the repository, so you can just download them and
   -- place them in the correct locations.
 
@@ -976,8 +1037,12 @@ require('lazy').setup({
   --    This is the easiest way to modularize your config.
   --
   --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
-  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
   -- { import = 'custom.plugins' },
+  --
+  -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec`
+  -- Or use telescope!
+  -- In normal mode type `<space>sh` then write `lazy.nvim-plugin`
+  -- you can continue same window with `<space>sr` which resumes last telescope search
 }, {
   ui = {
     -- If you are using a Nerd Font: set icons to an empty table which will use the