A new script to send email upon received sms

scripts/ros6-lteLogger2.rsc

@@ -1,3 +1,5 @@
+# Source: https://forum.mikrotik.com/viewtopic.php?t=178312
+
 /system script job remove [find script=lteLogger2]
 
 /system scheduler

scripts/sms-to-email.rsc

@@ -0,0 +1,52 @@
+# Source: https://forum.mikrotik.com/viewtopic.php?f=9&t=61068#p312202
+
+# Script to forward SMS from GSM Modem Inbox to Email #
+# Note: The SMS is removed from the inbox after being sent to Email, #
+# even if the Email fails to be sent #
+# Remember to set up /Tools/SMS with the USB port of your #
+# Modem and the info channel. Put anything in secret and #
+# make sure Receive Enabled is ticked #
+# Tested on Rb751U RouterOS v5.12 with Huawei E367 #
+# Peter James 2012-04-04 #
+
+
+:local EmailAddress "your_email_address";
+:local smsPhone;
+:local smsTimeStamp;
+:local smsMessage;
+:local smsContent;
+
+# Get System Identity #
+:local SystemID [/system identity get name];
+
+:log info "SMS to Email script started";
+
+# Set Receive Enabled, in case it was cleared by a router reboot #
+/tool sms set receive-enabled=yes;
+
+delay 2;
+
+# loop through all the messages in the inbox #
+:foreach i in=[/tool sms inbox find] do={
+
+:set smsPhone [/tool sms inbox get $i phone];
+:set smsTimeStamp [/tool sms inbox get $i timestamp];
+:set smsMessage [/tool sms inbox get $i message];
+
+:set smsContent "Router ID: $SystemID\nSMS Received from: $smsPhone\nDate&Time: $smsTimeStamp\nMessage: $smsMessage";
+
+:log info $smsContent;
+
+/tool e-mail send tls=yes subject="$SystemID GSM Modem SMS Received" to=$EmailAddress body="$smsContent";
+
+# Now remove the SMS from the inbox #
+/tool sms inbox remove $i;
+
+delay 10;
+
+}
+
+# clear Receive Enabled, so info channel can be used by other scripts #
+/tool sms set receive-enabled=no;
+
+:log info "SMS to Email script complete";