Renato Almeida de Oliveira 5dd6ae782a Set export on Config to verbose (#104) ... * Set export on Config to verbose SUMMARY In the configuration export session i think that using /export verbose is better than just /export, because with export only some configurations sections are going to be missed like BGP configuration, as proposed in https://github.com/ansible/ansible/pull/67868 ISSUE TYPE Bugfix Pull Request COMPONENT NAME facts.py ADDITIONAL INFORMATION extract of the output with /export verbose # software id = # # # /interface ethernet set [ find default-name=ether1 ] advertise=\ 10M-half,10M-full,100M-half,100M-full,1000M-full arp=enabled arp-timeout=\ auto auto-negotiation=yes cable-settings=default disable-running-check=\ yes disabled=no full-duplex=yes loop-protect=default \ loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\ 50:00:00:02:00:00 mtu=1500 name=ether1 orig-mac-address=50:00:00:02:00:00 \ rx-flow-control=off speed=1Gbps tx-flow-control=off set [ find default-name=ether2 ] advertise=\ 10M-half,10M-full,100M-half,100M-full,1000M-full arp=enabled arp-timeout=\ auto auto-negotiation=yes cable-settings=default disable-running-check=\ yes disabled=no full-duplex=yes loop-protect=default \ loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\ 50:00:00:02:00:01 mtu=1500 name=ether2 orig-mac-address=50:00:00:02:00:01 \ rx-flow-control=off speed=1Gbps tx-flow-control=off set [ find default-name=ether3 ] advertise=\ ..... ..... Extract of Output with only /export: # software id = # # # /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip dhcp-client add dhcp-options=hostname,clientid disabled=no interface=ether1 <END> * Create 104_facts_export_verbose * Update changelogs/fragments/104_facts_export_verbose Co-authored-by: Felix Fontein <felix@fontein.de> * Rename export to export_verbose * Rename 104_facts_export_verbose to 104_facts_export_verbose.yml Co-authored-by: Felix Fontein <felix@fontein.de>		2020-10-26 15:18:40 +01:00
..
api.py	add api.py (#97)	2020-10-26 15:18:40 +01:00
command.py	modules: fix examples to use FQCN (#88)	2020-10-26 15:18:40 +01:00
facts.py	Set export on Config to verbose (#104)	2020-10-26 15:18:40 +01:00