mirror.MikroTik/Fluent-networks.tailscale-mikrotik
1
0
Fork 0
mirror of https://github.com/Fluent-networks/tailscale-mikrotik.git synced 2025-07-16 04:14:32 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions

0.1.23

Browse source 
Tailscale 1.48.2
Changes to README to include supported architectures
This commit is contained in:
Frank Edwards 2023-09-15 10:50:10 +10:00
parent 955833c349
commit 3cfd939203
2 changed files with 9 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

9
README.md
View file

@ -8,9 +8,13 @@ The instructions below assume a use case for tailscale-enabled hosts accessing a
Other site to site scenarios are outlined in the [project wiki](https://github.com/Fluent-networks/tailscale-mikrotik/wiki).
## Requirements
The Mikrotik Container package is compatible with ARM, ARM64 and x86 architectures and the router must be be running RouterOS v7.6 or later. Refer to the [Mikrotik Container documentation](https://help.mikrotik.com/docs/display/ROS/Container) for recommendations, disclaimer and security risks.
## Instructions
The container runs as a [tailscale subnet router](https://tailscale.com/kb/1019/subnets/) on a Mikrotik hAP ac3. There are two subnets configured:
The example container runs as a [tailscale subnet router](https://tailscale.com/kb/1019/subnets/) on a Mikrotik hAP ac3. There are two subnets configured:
* 192.168.88.0/24: the default bridge with physical LAN interface ports, routed to the tailscale network
* 172.17.0.0/16: the docker bridge with a virtual ethernet (veth) interface port for the container
@ -29,7 +33,7 @@ The build script uses [Docker Buildx](https://docs.docker.com/buildx/working-wit
### Configure the Router
The router must be be running RouterOS v7.6 or later with the container package loaded; this section follows the Mikrotik Container documentation with additional steps to route the LAN subnet via the tailscale container.
This section follows the Mikrotik Container documentation with additional steps to route the LAN subnet via the tailscale container.
1. Enable container mode, and reboot.
@ -191,3 +195,4 @@ Note the script will continue to run if you are connecting over the tailnet. Whe
## Contributing
We welcome suggestions and feedback from people interested in integrating Tailscale on the RouterOS platform. Please send a PR or create an issue if you're having any problems.
v

4
build.sh
View file

@ -25,8 +25,8 @@
# https://mikrotik.com/products/matrix
#
PLATFORM="linux/arm/v7"
TAILSCALE_VERSION=1.48.1
VERSION=0.1.22
TAILSCALE_VERSION=1.48.2
VERSION=0.1.23
set -eu