diff --git a/Dockerfile b/Dockerfile
index 4603377..d6d105e 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -45,22 +45,17 @@ RUN GOARCH=$TARGETARCH go install -ldflags="\
 
 FROM ghcr.io/tailscale/alpine-base:3.14
 
-# Set username and password
-ARG TAILSCALE_USER="tailscale"
+# Set password
 ARG TAILSCALE_PASSWORD="Pm36g58CzaLK"
+RUN echo "root:$TAILSCALE_PASSWORD" | chpasswd
 
 RUN apk add --no-cache ca-certificates iptables iproute2 bash sudo openssh
 
-RUN addgroup -S tailscale
-RUN adduser --shell /bin/bash -S $TAILSCALE_USER -G tailscale \
-      && echo "$TAILSCALE_USER ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/$TAILSCALE_USER \
-      && chmod 0440 /etc/sudoers.d/$TAILSCALE_USER
-RUN echo "tailscale:$TAILSCALE_PASSWORD" | chpasswd
-
 RUN ssh-keygen -f /etc/ssh/ssh_host_rsa_key -N '' -t rsa
 RUN ssh-keygen -f /etc/ssh/ssh_host_dsa_key -N '' -t dsa
 
 COPY --from=build-env /go/bin/* /usr/local/bin/
+ADD sshd_config /etc/ssh/
 
 EXPOSE 22
 ADD tailscale.sh /usr/local/bin
diff --git a/README.md b/README.md
index 2367a20..9d0ea4a 100644
--- a/README.md
+++ b/README.md
@@ -18,18 +18,17 @@ A WAN interface is configured as per default configuration on **ether1** for con
 The build script uses [Docker Buildx](https://docs.docker.com/buildx/working-with-buildx/).
 
 1. In `build.sh` set the PLATFORM shell script variable as required for the target router CPU - see [https://mikrotik.com/products/matrix](https://mikrotik.com/products/matrix)
-2. In `Dockerfile` set the following arguments.
+2. In `Dockerfile` set the following argument.
 
-| Argument           | Description                     |
-| ------------------ | ------------------------------- |
-| TAILSCALE_USER     | Tailscale user name             |
-| TAILSCALE_PASSWORD | Password for the tailscale user |
+| Argument           | Description            |
+| ------------------ | ---------------------- |
+| TAILSCALE_PASSWORD | Password for root user |
 
 3. Run `./build.sh` to build the image. The build process will generate a container image file **`tailscale.tar`**
 
 ### Configure the Router
 
-The router must be be running  RouterOS v7.4beta4 or later with the container package loaded; this section follows the Mikrotik Container documentation with additional steps to route the LAN subnet via the tailscale container.
+The router must be be running RouterOS v7.4rc2 or later with the container package loaded; this section follows the Mikrotik Container documentation with additional steps to route the LAN subnet via the tailscale container.
 
 1. Upload the `tailscale.tar` file to your router. Below we will assume the image is located at `disk1/tailscale.tar`
 
@@ -53,10 +52,10 @@ The router must be be running  RouterOS v7.4beta4 or later with the container pa
 /interface/bridge/port add bridge=dockers interface=veth1
 ```
 
-5. Setup NAT for outgoing traffic
+5. Setup NAT for outgoing WAN traffic. 
 
 ```
-/ip/firewall/nat/add chain=srcnat action=masquerade src-address=172.17.0.0/16
+/ip/firewall/nat/add chain=srcnat action=masquerade src-address=172.17.0.0/16 out-interface=ether1
 ```
 
 6. Create environment variables as per the list below.
@@ -69,9 +68,9 @@ The router must be be running  RouterOS v7.4beta4 or later with the container pa
 
 ```
 /container/envs
-add list="tailscale" name="AUTH_KEY" value="tskey-xxxxxxxxxxxxxxxxxxxxxxxx"
-add list="tailscale" name="ADVERTISE_ROUTES" value="192.168.88.0/24"
-add list="tailscale" name="CONTAINER_GATEWAY" value="172.17.0.1"
+add name="tailscale" key="AUTH_KEY" value="tskey-xxxxxxxxxxxxxxxxxxxxxxxx"
+add name="tailscale" key="ADVERTISE_ROUTES" value="192.168.88.0/24"
+add name="tailscale" key="CONTAINER_GATEWAY" value="172.17.0.1"
 ```
 
 7. Create a container from the tailscale.tar image
@@ -87,7 +86,7 @@ If you want to see the container output in the router log add `logging=yes`
 ```
 /system/script
 add name="tailscale" source= {
-    :delay 10s
+    :delay 60s
     /container
     start [find tag="tailscale:tailscale"]
 }
@@ -108,7 +107,7 @@ Ensure the container has been extracted and added by verifying `status=stopped`
 
 In the Tailscale console, verify the router is authenticated and enable the subnet routes. Your tailscale hosts should now be able to reach the router's LAN subnet. 
 
-Note that the container exposes a SSH server for management purposes using the TAILSCALE_USER credentials, and can be accessed via the tailscale address or the LAN secondary IP address.
+The container exposes a SSH server for management purposes using root credentials, and can be accessed via the router's tailscale address or the veth interface address.
 
 ## Contributing
 
diff --git a/sshd_config b/sshd_config
new file mode 100644
index 0000000..8a38848
--- /dev/null
+++ b/sshd_config
@@ -0,0 +1,117 @@
+#	$OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/bin:/usr/bin:/sbin:/usr/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+#UsePAM no
+
+#AllowAgentForwarding yes
+# Feel free to re-enable these if your use case requires them.
+AllowTcpForwarding no
+GatewayPorts no
+X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/ssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server